Dynisco Melt pressure transmitters
Vertex - Melt pressure sensor
- No fill material or moving internal parts
- RoHS compliant for sustainability programs
- Robust Inconel diaphragm is coated with Dymax®
- Diaphragm is much thicker with unique sidewall support
- mV/V, 4-20mA outputs available
- Available with J-type thermocouple temperature output
- 0-1,500 to 0-10,000 psi pressure range capability
- 4 year warranty for proven lower cost of ownership
SPX 2242 - is a smart 4 - 20 mA pressure transmitter designed for use in hazardous locations.
- HART digital communication
- Better than +/- 0.25% combined error
- 4 - 20 mA loop-powered output
- 0 - 250 to 0 -30,000 psi
- Explosion Proof, Intrinsically Safe/ATEX approved*
- Meets PED and CE requirements
- Configurable via handheld
- Precise repeatable pressure measurments
- Output supplied directly to DCS or PLC
- Customer defined pressure ranges
- Approved for hazardous environments
- Meets new EC requirements
SPX 4222 - Smart Pressure Transmitters for Threaded Installations / 4 - 20 mA
- HART™ digital communication
- Better than ± 0.25% combined error
- 4 - 20 mA loop-powered output
- 0 - 250 to 0 - 30,000 psi
- ATEX/Intrinsically Safe approved
- Meets PED and CE requirements
SPX 4622 - Smart Pressure Transmitters for Threaded Installations / 4 - 20 mA
- HART™ digital communication
- Better than ±0.5% combined error
- 4 - 20 mA loop-powered output
- 0 - 1,500 to 0 -30,000 psi
- ATEX/Intrinsically Safe approved
- Meets PED and CE requirements
SPX-T 3242 - High Accuracy Smart Pressure Transmitters with Temperature Compensationns / 4 - 20 mA
- 1/2-20 UNF thread pressure transmitter
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.25% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
SPX-T 3342 - High Accuracy Smart Pressure Transmitters with Temperature Compensationemperature Compensationns / 4 - 20 mA
- 1/2-20 UNF thread pressure transmitter
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.15% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
SPX-T 3243 - Small Button Seal Flange-Mount Pressure Transmitter with Temperature Compensation
- Small diaphragm and mounting flange for easier installation
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.25% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
SPX-T 3343 - Small Button Seal Flange-Mount Pressure Transmitter with Temperature Compensation
- Small diaphragm and mounting flange for easier installation
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.15% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
SPX-T 3290 - Button Seal, Taylor Style Replacement Flange-Mount Pressure Transmitter with Temperature Compensation
- Large diaphragm and optional split flange for easier installation
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.25% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- Meets CE-PED requirements for European standards
- 0-500 to 0-10,000psi range options
SPX-T 3291 - Button Seal Flange-Mount Pressure Transmitter with Temperature Compensation
- Large diaphragm and mounting flange for easier installation
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.25% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
SPX-T 3390 - Button Seal, Taylor Style Replacement Flange-Mount Pressure Transmitter with Temperature Compensation
- Large diaphragm and optional split flange for easier installation
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.15% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
SPX-T 3391 - Button Seal Flange-Mount Pressure Transmitter with Temperature Compensation
- Large diaphragm and mounting flange for easier installation
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.15% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
MDT 420/460 F - 2-wire Melt pressure Transmitter with noise suppresion and "Auto-Zero" Push-Button_Function
- Simple and cheap unshielded two-wire cable connection in high noise ambients
- Efficient "Auto-Zero" adjustment either through pushbutton on the transmitter or in the control room
- 4-20 mA two-wire Signal output
- Electrical built-in calibration
- Installation for media temperatures up to 400°C
- Rigid stem between diaphragm and housing
- Failure detection through "fal-safe" signal levels acc. to NAMUR recommandation NE 43
MDT 420/460 X - Melt Pressure Transmitter for pressure measurement in hot media
- Installation for media temperature up to 400°C
- Rigid stem between diaphragm and housing
- Electrical built-in calibration
- Various high level outputs
- 4-20 mA, 2-wire, 0-10V DC, 3/4-wire and other volt output signal ranges
MDT 422/462F - Melt Pressure Transmitter
4 - 20 mA Output Melt Pressure Transmitters with Auto-Zero Functionality
MDT 435/467 X - Melt Pressure Transmitter
- Installation for media temperature up to 400°C
- Pressure transmitter for small areas
- Flexible capillary between diaphragm and housing
- Electrical built-in calibration
- Variuos high level outputs
- 4-20 mA, 2-wire, 0-10 V DC, 3/4-wire and other volt output signal ranges
MDT 435/467 F - 2-wire melt pressure transmitter with noise suppresion and "Auto-Zero" Push-Button-Function
- Simple and cheap unshielded two-wire cable connection in high noise ambients
- Efficient "Auto-Zero" adjustment either through pushbutton on the transmitter or in the control room
- 4-20 mA two-wire Signal output
- Electrical built-in calibration
- Installation for media temperatures up to 400°C
- Small sensing tip with free spinning jam nut, thin capillary for tight places
- Failure detection through "fail-safe" signal levels acc. to NAMUR recommendation NE43
TDT 432/463 X - Melt Pressure Transmitter
- Installation for media temperature up to 400°C
- Integral thermocouple for simultaneous temperature measurement at the media
- Flexible capillary between rigid stem and housing
- Various high level outputs
- Electrical built-in calibration
TDT 432/463 F - Melt Pressure Transmitter
- Installation for media temperature up to 400°C
- Integral thermocouple for simultaneous temperature measurement at the media
- Flexible capillary between rigid stem and housing
- Various high level outputs
- Electrical built-in calibration
SPX 4502 - Melt Pressure Transmitter
- HART digital communication
- Better than +/- 0.5% combined error
- 4-20 mA loop-powered output
- 0-250 to 0-10000 psi
- ATEX/Intrinsically safe approved
- Meets PED and CE requirements
SPX 4352 - Melt Pressure Transmitter
- HART digital communication
- Better than +/- 0.25% combined error
- 4-20 mA looppowered output
- 0 - 500 to -30.000 psi
- ATEX/Intrinsically safe approved
- meets PED and CE requirements
SPX 4232 - Melt Pressure Transmitter
- HART digital communication
- Better than +/- 0.25% combined error
- 4-20 mA loop powered output
- 0-500 to 0-30.000 psi
- ATEX / Intrinsically safe approved
- meets PED and CE requirements
PT 420/460DN - Melt Pressure Transmitter
No more available. Successor SPX 4222 / SPX 4622
IPX II 1195/2195 - Melt Pressure Transmitter
- Accuracy of +/-0.15% of range compensated for temperature (range specific)
- Temperature compensation
- 4 - 20 mA, 2-wire output
- 6:1 span turn - down capability
- optional second 4 to 20 mA signal for temperature
- optional programmable LCD display
- HART digital communication
- FM approved models
IPX II 1192/2192 - Melt Pressure Transmitter
- Accuracy of +/-0.15% of range compensated for temperature (range specific)
- Temperature compensation
- 4 - 20 mA, 2 -wire output
- 6:1 san turn - down capability
- Optional second 4 to 20mA signal for temperature
- Optional programmable LCD display
- HART digital communication
- FM approved models
PT 432/463DN - Melt Pressure Transmitter
No more available. Successor SPX 4222 / SPX 4622
PT 422/462DN - Melt Pressure Transmitter
No more available. Successor SPX 4222 / SPX 4622