TRMS multimeter clamp
MX 350 - multimeter clamp
- AC and/or DC current up to 400 A and 1000 A
- AC/DC voltage up to 1000 V (RMS technology for MX 655)
- Resistance measurement, continuity test and diode test
- Current and voltage frequency measurement
- 4,000-count display with bargraph
- Automatic or manual calibre selection
- Complementary functions: Hold, Max/min, Peak,...
MX 355 - multimeter clamp
- 4,000 counts
- 42-segment bargraph
- Clamping diameter 30mm
- 40A and 400A AC current
- 40A and 400A DC current
- AC voltage: 400V and 600V
- DC voltage: 400V and 600V
- Resistance: 400Ω
- Audible continuity test, diode test
- HOLD function
- EN61010-1 Cat.III 300V - Cat.II 600V safety
MX 650 - multimeter clamp
- 4,000 counts
- 42-segment bargraph
- Clamping diameter 40mm
- AC current 0.05 to 1,000A
- AC voltage 0.5 to 750V
- DC voltage 0.2 to 1,000V
- Resistance from 0.2Ω to 4kΩ
- A frequency from 10Hz to 4kHz
- V frequency from 10Hz to 10kHz
- Audible continuity test, diode test
- HOLD function
- Safety: EN61010-1 Cat.III 600V, Pol.2 safety
MX 655 - multimeter clamp
- 4000 counts
- 42-segment bargraph
- Clamping diameter 40mm
- AC current from 0.05 to 1,000A RMS
- DC current from 0.1 to 1,000A
- AC voltage from 0.5 to 750V RMS
- DC voltage from 0.2 to 1,000V
- Resistance from 0.2Ω to 4kΩ<(/li>
- A frequency from 20Hz to 10kHz
- V frequency from 10Hz to 10kHz
- Audible continuity test, diode test
- Functions: HOLD, MIN-MAX, REL (relative measurement)
- Safety: EN61010-1 Cat.III 600V,Pol.2
MX 670 - Two-display TRMS AC multimeter clamp
- 10,000-count backlit display
- Clamping diameter: 42 mm
- AC current: 0.05 A to 1,000 A
- DC voltage: 0.2 A to 1,400 V
- AC voltage: 0.5 V to 1,000 V
- Resistance: 0.2 Ω to 10 kΩ<(/li>
- Frequency: up to 10 kHz (A and V)
- Temperature: -40.0°C to 1,200 °C (K thermocouple)
- Diode test and audible continuity
- HOLD, MIN, MAX and Peak functions
- 600 V CAT IV
MX 675 - Two-display TRMS AC/DC multimeter clamp
- 10,000-count backlit display
- Clamping diameter: 40 mm
- DC current: 0.05 A to 1,400 A
- AC current: 0.05 A to 1,000 A
- DC voltage: 0.2 A to 1,400 V
- AC voltage: 0.5 V to 1,000 V
- Resistance: 0.2 Ω to 10 kΩ
- Frequency: up to 10 kHz (A and V)
- Temperature: -40.0°C to 1,200 °C (K thermocouple)
- Diode test and audible continuity test
- HOLD, MIN, MAX, Peak and ΔZero functions
- 600 V CAT IV
F200 - AC, DC and AC+DC TRMS Clamp Multimeters
- Current: 2,000 A AC / 3,000 A DC
- Voltage: 1,000 V AC/DC
- Clamping diameter: 60 mm
- Large 10,000-count display
- Automatic AC / DC detection
- Min, Max, Peak
- RELative and differential measurements
- Power values
- THD & Harmonics
HT7003 - Compact digital AC clamp up to 300A
- Display: LCD, 3 ¾ digits with maximum reading 4000 counts + decimal point
- Function: Data HOLD
- Measuring rate: 2.5 times per second.
- Low battery indicator: The " BAT " appears at display
- Operating temperature: 0°C - 40°C, <80% RH
- Storage temperature: -10°C - 50°C, <70%RH
- General informations:
- Altitude max of use: 2000m
- Pollution degree: 2
- Insulation: double insulation
- Max. diameter conductor : 27 mm
- Power supply:
- 1 x 3V disk battery type CR2032
- Auto Power OFF function after 12 minutes of idleness
- Dimension: 150 (H) x 52 (W) x 24 (L) mm
- Weight: 110g (battery included)
- Reference guidelines:
- Safety IEC/EN 61010-1, IEC/EN61010-2-32, CAT III 300V
- EMC: IEC/EN61326-1
HT4011 - Robuste Stromzange bis 400A AC und 600V AC/DC mit „Spannungs-Sensor“
- AC Strom bis 400 A
- AC/DC Spannung bis 600 V
- Widerstandsmessung
- Durchgangsprüfung mit Summer
- "Spannungs”-Sensor
- Frequenz
- Kapazität
- Temperatur mit K-Typ Fühler
- Diodentest
- Tastverhältnis
- Automatische Bereichswahl
- Data HOLD
- Relativ Messung
- AutoPowerOFF
HT4013 . Robuste Stromzangen bis 400A AC bzw. 400A DC und 600V AC/DC
- AC Strom bis 400 A
- DC Strom bis 400 A
- AC/DC Spannung bis 600 V
- Widerstandsmessung
- Durchgangsprüfung mit Summer
- „Spannungs”-Sensor
- Frequenz
- Kapazität
- Temperatur mit K-Typ Fühler
- Diodentest
- Tastverhältnis
- Automatische Bereichswahl
- Data HOLD
- Relativ Messung
- AutoPowerOFF
HT9012 - professional clamp meter
- AC current up to 600A
- DC/AC voltage up to 1000V
- "Voltsense” feature for AC voltage detection
- Resistance
- Continuity test with buzzer
- Manual/Autorange
- Data HOLD
- MAX
- Backlight
- AutoPowerOFF
HT9014 - AC TRMS professional clamp meter 600A, 6000 points
- TRMS measurement
- AC current up to 600A
- DC/AC voltage up to 1000V
- “Voltsense” feature for AC voltage detection
- Resistance
- Continuity test with buzzer
- Frequency with jaws and test leads
- Capacitance
- Diode test
- Duty Cycle
- Temperature with type K probe
- Autorange
- Data HOLD
- MAX/MIN/ZERO
- PEAK CURRENT (<10ms)
- Backlight
- Bargraph
- Auto Power OFF
HT9015 - professional clamp meter
- TRMS measurement
- DC/AC current up to 600A
- DC/AC voltage up to 1000V
- “Voltsense” feature for AC voltage detection
- Resistance
- Continuity test with buzzer
- Frequency with jaws and test leads
- Capacitance
- Diode test
- Duty Cycle
- Temperature with type K probe
- Autorange
- Data HOLD
- MAX/MIN/ZERO
- PEAK CURRENT (<10ms)
- Backlight
- Bargraph
- Auto Power OFF
HT9019 - professional clamp meter
- TRMS measurement
- AC current up to 1000A
- DC/AC voltage up to 1000V
- “Voltsense” feature for AC voltage detection
- Resistance
- Continuity test with buzzer
- Autorange
- Data HOLD
- MAX/MIN/ZERO
- PEAK CURRENT (<10ms)
- Backlight
- Bargraph
- Auto Power OFF
HT9021 - DC/AC TRMS professional clamp meter 1000A, 6000 points
- TRMS measurement
- DC/AC current up to 1000A
- DC/AC voltage up to 1000V
- “Voltsense” feature for AC voltage detection
- Resistance
- Continuity test with buzzer
- Frequency with jaws and test leads
- Capacitance
- Diode test
- Duty Cycle
- Temperature with type K probe
- Autorange
- Data HOLD
- MAX/MIN/ZERO
- PEAK CURRENT (<10ms)
- Backlight
- Bargraph
- Auto Power OFF
