Voltage testers
Prüfball SPB analogue - rubber encapsulated voltage tester
- safety casing made of solid rubber extremely impact resistant, water and dust proof
- CAT IV – highest degree of safety against surge voltage
- reliable testing without battery, high-impedance and low resistive tests (separately activatable per push-button)
- three display systems: high-precision measuring system, LED and LCD
- wide range of types: several measurement ranges up to 1000 V optional: phase and phase sequence tester, continuity tester, acoustic signal
- Nominal voltage: 50 ... 500 / 740 / 1000 V
- Frequency: 0 ... 100 Hz
- Power supply: without battery, maintenance free
- Phase-, Phase sequence tester: Yes
- Continuity tester: Yes
- Protection category: IP 65
Prüfball SPB Digital - voltage tester
- Safety casing made of solid rubber extremely impact resistant, water and dust-proof
- Maintenance-free – battery is not required
- Direct reading of all functions by LED and LCD without keypress
- Phase, phase sequence and continuity test, connectible 30 mA RCD tripping
- Reliable phase sequence test by microcontroller analysis, possible with gloves
- Nominal voltage: 50 ... 500 / 1000 V
- Frequency: 0 ... 2000 Hz
- Power supply: without battery, maintenance free
- Phase-, Phase sequence tester: Yes
- Continuity tester: Yes
- Protection category: IP 65
MultiSafe DSP 4
- Precise indication of voltage from 10 mV up to 1200 V AC / 1500 V DC
- Phase, phase sequence and continuity tester (possible with gloves)
- continuity tester up to 2 MΩ
- Highest degree of safety provided by protective resistors in both test prods
- Easy operation large illuminated display
- Nominal voltage: 0,01 ... 1200 V AC / 1500 V DC
- Frequency: 0 ... 10 000 Hz
- Power supply: 9V - 6LR61
- Phase-, Phase sequence tester: Yes
- Continuity tester: Yes
- Protection category: IP 65
MultiSafe DSP 4F
- Precise indication of voltage from 10 mV up to 1200 V AC / 1500 V DC
- Phase, phase sequence and continuity tester (possible with gloves)
- continuity tester up to 2 MΩ
- Highest degree of safety provided by protective resistors in both test prods
- Easy operation large illuminated display
- Nominal voltage: 0,01 ... 1200 V AC / 1500 V DC
- Frequency: 0 ... 10 000 Hz
- Power supply: 9V - 6LR61
- Phase-, Phase sequence tester: Yes
- Continuity tester: Yes
- Protection category: IP 65
ProfiSafe LSP 4L - voltage tester without battery. All functions work maintenance free. Illuminated LCD with voltage value indication 12 - 690 V, phase and phase sequence tester.
- voltage indication from 12 up to 690 V AC / DC
- maintenance free, without battery – power supply from the test voltage
- phase sequence indication by clear symbols (clockwise / counter-clockwise), works also with personal protective equipment!
- phase and continuity test
- highest degree of safety against surge voltage CAT IV 600 V
- robust casing water and dust proofed – IP 65
- illuminadted display
MultiSafe DSP TT 1 - Telescope voltage tester
- Precise indication of voltage up to 1000 V
- Test height up to 6,2 meter variable height adjustment
- Highest degree of safety provided by protective resistors within test prod, maximum current < 3,2 mA
- Easy operation with one single push-button, self-test for tesing function, protective resistors and proper ground connection
- Nominal voltage: 50 ... 1000 V
- Frequency: 0 ... 500 Hz
- Power supply: 9V - 6LR61
- Test height: 6,2 / 8,2 m
- Self test: Yes
- Protection category:IP 65
Prüfball ZAP 350 analogue - voltage tester
- Indication of voltages up to 500 V
- Connectible capacity of 350 W for fast start-up tests
- Phase, phase sequence and continuity tester
- Thermal and overvoltage protection
- No battery required
- Nominal voltage: 50 ... 500 V
- Frequency: 0 ... 100 Hz
- Power supply: without battery, maintenance free
- Phase-, Phase sequence tester: Yes
- Continuity tester: Yes
- Connectible load: 350 W
- Protection category: IP 65
Prüfball ZAP 350L digital - electricity meter tester
- Direct indication of voltages up to 500 V
- Connectible capacity of 350 W for fast start-up tests
- Phase, phase sequence and continuity tester
- Thermal and overvoltage protection
- No battery required
- Nominal voltage: 50 ... 500 V
- Frequency: 0 ... 2000 Hz
- Power supply: without battery, maintenance free
- Phase-, Phase sequence tester: Yes
- Continuity tester: Yes
- Connectible load: 350 W / 1050 W
- Protection category: IP 65
Accessories - bags / probe tips / extensions / test lines
- To use existing testers even more versatile you can extend them with our accessories.
- As known from our voltage tester we pay attention to the highest security requirements, high functionality and quality.
- Zubehör für SPB/ZAP und DSP/LSP
Prüfball SPB 1050L Digital - maintenance-free Voltage and continuity tester for the energy supplier and industrial
- Nominal voltage range 50 - 1000 V
- Additional load for 30 mA RCD and interference voltage
- Surge voltage category CAT IV 1000 V
- Frequency range: DC / 15 – 2000 Hz
- Power supply: without battery – maintenance-free
- Phase, phase sequence test: Yes
- Contunuity test: Yes
- Protection category: IP 65
DUSPOL Digital - Voltage Tester
- indication LCD / LED
- Voltage range 1 – 1000 V AC (TRUE RMS)1 – 1200 V DC
- continuity test yes / yellow LED
- phase-sequence test yes / green LED (left / right)
- single-pole / phase test yes / red ⚡ LED
- polarity test yes / LCD
- load connection via push buttons IS = 550 mA (1000 VDC)
- 30 mA FI triggering via push button yes
- vibrating alarm yes
- measuring point illumination yes
- resistance measuring 0.1 kΩ – 300 kΩ
- diode test 0.3 V – 2 V
- frequency measuring 1 Hz – 1000 Hz
- non-contact phase tester cable / break detector yes / yellow LED (flashing)
- protection class IP 65
- overload class CAT IV 600 V CAT III 1000 V
- VDE / GS approval yes
DUSPOL expert - Voltage Tester
- indication LED
- Voltage range 12 – 1000 V AC/DC
- continuity test yes / yellow LED
- phase-sequence test yes / green LED (left / right)
- single-pole / phase test yes / red ⚡ LED
- polarity test yes / LED
- load connection via push buttons IS = 550 mA (1000 VDC)
- 30 mA FI triggering via push button yes
- vibrating alarm yes
- measuring point illumination yes
- diode test pass - / reverse direction
- non-contact phase tester cable / break detector yes / yellow LED (flashing)
- protection class IP 65
- overload class CAT IV 600 V CAT III 1000 V
- VDE / GS approval yes
PROFIPOL - Voltage and Continuity Tester With additional functions and convenient design
- indication LED
- voltage range 12 – 690 V AC / DC
- continuity test buzzer / yellow LED
- single-pole external conductor test Ja / red „lightning“ LED
- polarity test yes / LED
- cable break detector yes / yellow LED
- protection class IP 54
HT6 - 2-pole multifunction tester with LED indications and LED torch
- AC/DC voltage
- Continuity with buzzer
- Diode test
- Phase sequence
- EMC 2004/108/CE Directive
- LVD 2006/95/CE Directive
- IEC/EN 61010-1
- IEC/EN61243-3:2010
- CE MARK
- EMC: IEC/EN61326
HT8 - 2-pole multifunction tester with indication of values with LEDs and on the display
- AC/DC voltage
- Continuity with buzzer
- Diode test
- Phase sequence
- EMC 2004/108/CE Directive
- LVD 2006/95/CE Directive
- IEC/EN 61010-1
- IEC/EN61243-3:2010
- CE MARK
- EMC: IEC/EN61326
- IEC/EN61010-2-030
HT9 - 2-pole multifunction tester with lamp test function and indication of values with LEDs and on the display
- AC/DC voltage : max 590V
- Continuity with buzzer
- Diode test
- Phase sequence
- Test lamps with internal gas
- EMC 2004/108/CE Directive
- LVD 2006/95/CE Directive
- IEC/EN 61010-1
- IEC/EN61243-3:2010
- CE MARK
- EMC: IEC/EN61326
- IEC/EN61010-2-030
HT710 - Pen multifunctional digital meter
- DC Voltage
- AC Voltage
- Frequency
- Resistance
- Continuity test with buzzer
- Diode test
- Data HOLD
- Manual range selection
- Relative measures
- AutoPowerOFF
HT712 - TRMS pen multifunctional digital meter with phase sequence and phase conformity
- DC Voltage
- AC TRMS Voltage with 2 wires
- AC TRMS Voltage with 1 wire
- Automatic detection of AC/DC Voltage
- Frequency
- Resistance
- Phase Rotation with 1 wire
- Phase Conformity with 1 wire
- Continuity test with buzzer
- Data HOLD
- Auto Power OFF
HT12 - Compact digital multimeter with integrated fork sensor
- DC Voltage
- AC Voltage
- DC Current with integrated fork sensor
- DC Current with integrated fork sensor
- Resistance and continuity test with buzzer.
- Frequency of current and voltage
- Data HOLD
- Auto / Manual range
- Auto Power OFF
C.A 771 - CAT IV 1000 V IP65 Type S Voltage Absence Tester (VAT)
- CAT IV 1,000 V
- IP65
- Full autotest
- Voltage detection, LED display: 12 VAC ≤ U ≤ 1,000 VAC • 12 VDC ≤ U ≤ 1,400 VDC
- Frequency: DC, 162/3 to 800 Hz
- Detection of stray voltages
- Unipolar phase detection (a single contact)
- Two-pole phase-sequence testing with 2-wire method = a third hand is not required
- Continuity test with audible and visual indication (R < 100 Ω)
- Extended continuity test with visual indication for R < 2 kΩ , 60 kΩ and 300 kΩ
- RCD trip test
- Complies with EN 61243-3 Ed.2009, EN 61243-3 Ed.2010 & IEC 61010 1000 V CAT IV
- Climatic conditions:-30 °C to +60 °C (Class S)
- Battery life > 5,000 x 10 s measurements
- Removable lead and test probe
- Delivered complete and ready to use
C.A 773 - CAT IV 1000 V IP65 two-pole Voltage Absence Tester (VAT)
- CAT IV 1,000 V
- IP65
- Full autotest
- Voltage detection, LED display + backlit digital display: 12 VAC ≤ U ≤ 1,000 VAC • 12 VDC ≤ U ≤ 1,400 VDC
- Frequency: DC, 162/3 to 800 Hz
- Stray voltage detection
- Unipolar phase detection (a single contact)
- Two-pole phase-sequence testing with 2-wire method = a third hand is not required
- Continuity test with audible and visual indication (R < 100 Ω)
- Extended continuity test with visual indication for R < 0.5 Ω to 2.999 kΩ
- RCD trip test
- Complies with EN 61243-3 Ed.2009, EN 61243-3 Ed.2010 & IEC 61010 1000 V CAT IV
- Climatic conditions: -15 °C to +45 °C (Class N)
- Battery life > 2,500 x 10 s measurements
- Removable lead and test probe
- Delivered complete and ready to use
