HySense QT206 - CAN turbine volume flow sensor
- Measuring principle volume flow
- Viscosity range 1 ... 10 mm²/s (cSt)
- Medium temperature max. +120 °C
- Environmental temperature -20 ... +85 °C
- Storage temperature -20 ... +85 °C
- Output signal CANopen
- Supply voltage Ub 8.5 ... 30 VDC
- Electrical measuring connector 5 pole device connector, M12 x 1
- Protection type (EN 60529 / IEC 529) IP 67 (screwed)
- Tightening torque 10 Nm (± 2 Nm)
- Calibration viscosity 30 mm²/s (cSt)
- Material turbine casing high-grade steel, passivated (X12CrNiS18 8)
- Material turbine wheel 1.4122 (for measuring range 1.0 ... 10 l/min) 1.0718 (for all other measuring ranges)
- Material sealings FKM
- Material sensor casing 3.1645
- Current consumption max. 50 mA @ 24 VDC
- Interface CANopen (CIA-DS-301)
- CAN standard 2.0A (opt. 2.0B)
- Transmission rate 20 ... 1,000 kBit/s
- Measured frequency (Hz) bytes 0 ... 3
- Measured volume flow (l/min) bytes 4 ... 7
- Resolution three decimal places
- Suitable measuring cable CAN cable
