Gear flow meters
HySense® QG 200
- Operating medium: fuels, hydraulic oils, gear oils, brake fluids, Skydrol *
- Flow range 0.005… 120 L / min *
- Output signal frequency / 4… 20 mA **
- Viscosity range 1… 120,000 mm² / s (cSt) *
- measurement accuracy up to ± 0.3% of the value M.
- Medium temperature -20… 100 ° C
- Ambient temperature -20… 85 ° C
- Material of housing cover stainless steel *
- Material of middle section / base assembly stainless steel *
- Material seals FKM / EPDM *
- Electrical measuring connection 6-pin. Round connector M16 x 0.75 *
- IP protection class IP 67 (DIN EN 60529)
- Mechanical connection, panel construction / lateral thread connection
Gear flow meters type GFM
Measuring of the volume flow rate For the measuring of the volume flow rate, pulses are evaluated as a volume per time in any flow unit whatever, e.g. l/min. Counting of the volume (quantity) For the counting of the volume, induividual pulses per gear tooth volume are added up in the instrument and are shown in freely selectable volume units.
HySense QG100 - Gear volume flow sensor
- Measuring principle displacement
- Viscosity range 5 ... 500 mm²/s (cSt)
- Medium temperature -20 ... +120 °C
- Environmental temperature max. +80 °C
- Storage temperature -20 ... +85 °C
- Output signal frequency (rectangle) / 4 ... 20 mA
- Supply voltage Ub 12 ... 24 VDC
- Electrical measuring connector 5 pole device connector, M16 x 0.75
- Protection type (EN 60529 / IEC 529) IP 40
- Tightening torque < 0.5 Nm, thread pin (clamping piece) T 3362000
- Calibration viscosity 30 mm²/s (cSt)
- Material casing cover 1.4305
- Material middle / bottom part 0.7060
- Material sealings FKM
- Material gear wheels 1.7131
- Suitable measuring cable MK 01
HySense QG 107 - Gear volume flow sensor for high-temperature applications
- Measuring principle displacement
- Viscosity range 5 ... 500 mm²/s (cSt)
- Medium temperature -20 ... +160 °C
- Environmental temperature max. +50 °C (amplifi er)
- Storage temperature -20 ... +85 °C
- Output signal frequency (rectangle)
- Supply voltage Ub 10 ... 30 VDC
- Electrical measuring connector 4 pole device connector, M12 x 1
- Protection type (EN 60529 / IEC 529) IP 64
- Tightening torque 8 Nm (± 2 Nm)
- Calibration viscosity 30 mm²/s (cSt)
- Material casing cover 1.4305
- Material middle / bottom part 0.7060
- Material sealings FKM
- Material gear wheels 1.7131
- Suitable measuring cable customer-specifi c
HySense QG 110 - Gear volume flow sensor
- Measuring principle displacement
- Viscosity range 5 ... 500 mm²/s (cSt)
- Medium temperature -20 ... +120 °C
- Environmental temperature max. +80 °C
- Storage temperature -20 ... +85 °C
- Output signal frequency (rectangle) / 4 ... 20 mA
- Supply voltage Ub 12 ... 24 VDC
- Electrical measuring connector 5 pole device connector, M16 x 0.75
- Protection type (EN 60529 / IEC 529) IP 40
- Tightening torque < 0.5 Nm, thread pin (clamping piece) T 3362000
- Calibration viscosity 30 mm²/s (cSt)
- Material casing cover 1.4305
- Material middle / bottom part 0.7060
- Material sealings FKM
- Material gear wheels 1.7131
- Suitable measuring cable MK 01
