Humidity sensors
IFA 300-2 Ex - Dew point sensor with ATEX approval for Zone 1
- Robust design
- Pressure-tight up to 300 bar
- Long-term stable humidity sensor, approved for years
- 4...20 mA analogue output in 2-wire system
- Further parameters adjustable via software: % RH, g/m³, mg/m³, ppm, V/V, g/kg
- Software for data storage and calibration (no approval for explosive areas)
IFA 510 / 515 - Dew point sensor from -80 to 20°Ctd
- Measuring range -80...20°Ctd
- Extremely long-term stable
- Analogue output 4...20 mA
- Condensation insensitive
- Quick response time
- Pressure-tight up to 350 bar (special version)
- NEW: Modbus-RTU interface
- NEW: Higher resolution of the sensor signal due to improved evaluation electronics
- NEW: Sensor diagnosis on site by means of hand-held instrument or Software
IFA 500 - Dew point sensor from -80 to 20°Ctd
- Modbus-RTU interface
- Higher resolution of sensor signal caused by the improved evaluation electronics
- Sensor diagnosis on site with a portable device or CS Service Software
- Integrated display
- Threshold value adjustable via keypad alarm relay (max. 60 VDC, 0,5 A)
- Pressure-tight up to 350 bar (special version)
- Extreme long-term stability
- Quick response time
- 4...20 mA analogue output
- 2 versions: Refrigeration driers and desiccant driers
testo 6681 - The industrial humidity transmitter
- Optimum adjustment concept thanks to adjustment of the entire signal chain incl. analog adjustment
- Profibus, Ethernet, relay and analog outputs allow optimum integration into individual automation systems
- Self-monitoring and early warning guarantee high system availability
- Calculation and presentation of all relevant humidity parameters
- P2A software for parameterization, adjustment and analysis saves time and costs in commissioning and maintenance
- Display with multi-language display
- Robust, easy-to-clean metal housing
testo 6651 - Humidity transmitter for critical climate applications
- Optimum adjustment concept thanks to adjustment of the entire signal chain incl. analog adjustment
- Ethernet, relay and analog outputs allow optimum integration into individual automation systems
- Self-monitoring and early warning guarantee high system availability
- Calculation and presentation of the humidity parameters relative humidity absolute humidity and dewpoint.
- P2A software for parameterization, adjustment and analysis saves time and costs in commissioning and maintenance
- Display with multi-language display
- High-quality plastic housing
Compact-Messumformer für Feuchte und Temperatur
- präzise, langzeitstabil, temperaturbeständig, robust
- Spritzwassergeschütztes Kunstoffgehäuse (IP54)
- Einfache und schnelle Montage an der Wand oder im Kanal mit Rohrklemmenverschraubung
- Temperaturausgang (Pt100) durchgeschleift
- Messbereich: 0... + 100%rF
- Genauigkeit ±1 Digit: ±2%rF (+2... +98%rF)
- Betriebstemp.: -20 ... +70°C / -4 ... +158°F
- Lagertemp.: -40 ... +80°C / -40 ... +176°F
IDS 52 set - Dew point measurement for desiccant driers
- System ready for plug-in: Everything completely wired
- No time-consuming studying of the instruction manual
- 2 alarm contacts (230 VAC, 3 A) pre- and main alarm freely adjustable
- 4...20 mA analogue output
- Option alarm unit: Buzzer and continuous red light
HLK - Sensoren
zur Messung der relativen Luftfeuchtigkeit und der Temperatur
mit kapazitivem Feuchtesensorelement
zum Einsatz in der Klima-, Gebäudeleit- und Lüftungstechnik
verschiedene Ausführungen
IFK80J - Sensoren
zur Messung der relativen Luftfeuchtigkeit und der Temperatur
mit kapazitivem Feuchtesensorelement
mit Strom- oder Spannungsausgang
in Kanalausführung
IDK D-Serie Kanalausführung
zur Messung der relativen Luftfeuchtigkeit und der Temperatur
mit integriertem kalibrierten dModul
dynamisches Feuchtesensorelement
Ausgabe verschiedener hx-Größen möglich
Vor-Ort-Kalibrierung über Tasten und LED
montagefreundliches Gehäuse
Humidity and Temperature-sensor Type IDW
Industrial version for wall mounting. Optional display
Humidity and Temperature-sensor IDR (Room version)
Sensor for Humidity and Temperature Measurement with calibrated dModul
IVC / IVR - Sensor für Feuchte und Temperatur
zur Messung der relativen Luftfeuchtigkeit und der Temperatur
mit kapazitivem Mela®-Feuchtesensorelement
mit Strom- oder Spannungsausgang
Industrie-Stabsensor im Edelstahlgehäuse
