Flowmeters
IVA 500 - for flow measurement of compressed air and gases
- RS 485 interface, Modbus-RTU as a standard
- Integrated display for m³/h and m³
- Usable from 1/2“ to 12“ (DN 300)
- Easy installation under pressure
- 4...20 mA analogue output for m³/h resp. m³/min
- Pulse output for m³
- Inner diameter adjustable via keypad
- Consumption counter resettable
- Adjustable via keys at the display: Gas type, reference conditions, °C and mbar, 4...20 mA scaling, pulse weight
IVA 520 - the affordable flow meter for compressed air and gases
- The integrated Modbus interface enables the connection to superordinated control systems like energy management systems, building management systems, SPS, SCADA,
- Easy and affordable installation
- Units freely selectable via keys at the display m³/h, m³/min, l/min, l/s, kg/h, kg/min, kg/s, cfm
- Compressed air counter up to 1.999.999.999 m³. Resetable to „zero“ via keypad
- Analogue output 4...20 mA, pulse output (galvanically separated)
- High measuring accuracy also in the lower measuring range (ideal for leakage measurement)
- Negligibly small loss of pressure
- Calorimetric measuring principle, no additional pressure and temperature measurement necessary, no mechanically moved parts
- Comprehensive diagnosis functions can be read out at the display or by remote access via Modbus-RTU like e. g. exceeding Max./Min values °C, calibration cycle, error codes, serial number. All parameters can be read out and changed via Modbus
IVA 550 - Präzise Verbrauchs- / Durchflussmessung für Druckluft und Gase
- ideal auch für den Außenbereich
- Druckluftmessung und Verteilung
- leckagemessung von Druckluft und Gasen
- Verbrauchsmessung von Gasen wie z.B. Stickstoff, Argon, Kohlendioxid, Sauerstoff etc.
- Verbrauchsmessung in Vakuumanlagen
- Verbrauchsmessung von explosiven Gasen wie Erdgas, Methan, Propan, Wasserstoff mit ATEX Zulassung
- Verbrauchsmessung von korrosiven, ätzenden Gasen wie z.B. Biogas mit unterschiedlichen Gasgemischen
- Messung von Sauerstoff und Erdgas an Gasbrennern
- Verbrauchsmessung von Gasgemischen wie z.B. Formiergas
IVA 570 - Präzise Verbrauchs- / Durchflussmessung für Druckluft und Gase mit integrierter Messstrecke
- ideal auch für den Außenbereich
- Druckluftmessung und Verteilung
- leckagemessung von Druckluft und Gasen
- Verbrauchsmessung von Gasen wie z.B. Stickstoff, Argon, Kohlendioxid, Sauerstoff etc.
- Verbrauchsmessung in Vakuumanlagen
- Verbrauchsmessung von explosiven Gasen wie Erdgas, Methan, Propan, Wasserstoff mit ATEX Zulassung
- Verbrauchsmessung von korrosiven, ätzenden Gasen wie z.B. Biogas mit unterschiedlichen Gasgemischen
- Messung von Sauerstoff und Erdgas an Gasbrennern
- Verbrauchsmessung von Gasgemischen wie z.B. Formiergas
testo 6441 - compressed air meter
- Parameters: standard volumetric flow rate in Nm³/h or Nl/min; consumption quantity in Nm³; media temperature in °C
- Output signals: The following 2 outputs are enabled for selection at the same time:
- Analog output, 4 to 20 mA (4-wire)
- Pulse output
- 2 switch signals, programmable (dependent on consumption or volumetric flow rate, time-based or non time-based, NC or NO contact, hysteresis, window)
- Extremely easy to operate using just 2 control buttons
- Design with inflow stretch
- Advantage: reliable accuracy, including in installed state!<
- Reason: The sensor is calibrated to the pipe section (Nm³/h not m/s) -> optimum flow profile, hence no loss of accuracy through specification of incorrect pipe diameter, incorrect positioning (depth/torsion)!
testo 6442 - compressed air meter
- Parameters: standard volumetric flow rate in Nm³/h or Nl/min; consumption quantity in Nm³; media temperature in °C
- Output signals: The following 2 outputs are enabled for selection at the same time:
- Analog output, 4 to 20 mA (4-wire)
- Pulse output
- 2 switch signals, programmable (dependent on consumption or volumetric flow rate, time-based or non time-based, NC or NO contact, hysteresis, window)
- Extremely easy to operate using just 2 control buttons
- Design with inflow stretch
- Advantage: reliable accuracy, including in installed state!<
- Reason: The sensor is calibrated to the pipe section (Nm³/h not m/s) -> optimum flow profile, hence no loss of accuracy through specification of incorrect pipe diameter, incorrect positioning (depth/torsion)!
testo 6443 - compressed air meter
- Parameters: standard volumetric flow rate in Nm³/h or Nl/min; consumption quantity in Nm³; media temperature in °C
- Output signals: The following 2 outputs are enabled for selection at the same time:
- Analog output, 4 to 20 mA (4-wire)
- Pulse output
- 2 switch signals, programmable (dependent on consumption or volumetric flow rate, time-based or non time-based, NC or NO contact, hysteresis, window)
- Extremely easy to operate using just 2 control buttons
- Design with inflow stretch
- Advantage: reliable accuracy, including in installed state!<
- Reason: The sensor is calibrated to the pipe section (Nm³/h not m/s) -> optimum flow profile, hence no loss of accuracy through specification of incorrect pipe diameter, incorrect positioning (depth/torsion)!
testo 6444 - compressed air meter
- Parameters: standard volumetric flow rate in Nm³/h or Nl/min; consumption quantity in Nm³; media temperature in °C
- Output signals: The following 2 outputs are enabled for selection at the same time:
- Analog output, 4 to 20 mA (4-wire)
- Pulse output
- 2 switch signals, programmable (dependent on consumption or volumetric flow rate, time-based or non time-based, NC or NO contact, hysteresis, window)
- Extremely easy to operate using just 2 control buttons
- Design with inflow stretch
- Advantage: reliable accuracy, including in installed state!<
- Reason: The sensor is calibrated to the pipe section (Nm³/h not m/s) -> optimum flow profile, hence no loss of accuracy through specification of incorrect pipe diameter, incorrect positioning (depth/torsion)!
testo 6446 - compressed air meter - sensor can also be changed under pressure
- Parameters: standard volumetric flow rate in Nm³/h or Nl/min; consumption quantity in Nm³
- 14 diameter types between DN 65 (21/2“) and DN 250 (10“)
- Output signals: The following 2 outputs are enabled for selection at the same time:
- Analog output, 4 to 20 mA (4-wire)
- Pulse output
- 2 switch signals, programmable (dependent on consumption or volumetric flow rate, NC or NO contact, hysteresis, window)
- Choice of pipe materials: Stainless steel or galvanized steel
- All versions with display: volumetric flow rate or consumption
- Patented screw fitting for quick and easy removal of sensor electronic unit under pressure, without interrupting operation, for cleaning and recalibration
- Design with inflow stretch
- Advantage: reliable accuracy, including in installed state!
- Reason: The sensor is calibrated to the pipe section (Nm³/h not m/s) -> optimum flow profile, hence no loss of accuracy through specification of incorrect pipe diameter, incorrect positioning (depth/torsion)!
testo 6447 - compressed air meter - sensor can also be changed under pressure
- Parameters: standard volumetric flow rate in Nm³/h or Nl/min; consumption quantity in Nm³
- 14 diameter types between DN 65 (21/2“) and DN 250 (10“)
- Output signals: The following 2 outputs are enabled for selection at the same time:
- Analog output, 4 to 20 mA (4-wire)
- Pulse output
- 2 switch signals, programmable (dependent on consumption or volumetric flow rate, NC or NO contact, hysteresis, window)
- Choice of pipe materials: Stainless steel or galvanized steel
- All versions with display: volumetric flow rate or consumption
- Patented screw fitting for quick and easy removal of sensor electronic unit under pressure, without interrupting operation, for cleaning and recalibration
- Design with inflow stretch
- Advantage: reliable accuracy, including in installed state!
- Reason: The sensor is calibrated to the pipe section (Nm³/h not m/s) -> optimum flow profile, hence no loss of accuracy through specification of incorrect pipe diameter, incorrect positioning (depth/torsion)!
testo 6448 - Compressed air counter shaft probe DN40 - DN250
- Possibility of installation under pressure
- Measurement of flow velocity in the measuring range 0 to 80 m/s or 160 m/s; consumption measurement in m3 and media temperature in °C
- Recoil protection and ball valve ensure fast and safe installation and deinstallation of the compressed air probe
- Highest flexibility thanks to different signal outputs:
- Analog output 4 to 20 mA (4-wire)
- Pulse output
- 2 switching outputs (consumption or volume flowdependent)
- Integrated totalizer, also without additional evaluation unit
- Operating menu with LED display