Digital gauge
CPG 1500 Precision Digital Pressure Gauge
- Measuring ranges up to 0 ... 10,000 bar (0 ... 150,000 psi), vacuum and absolute pressure ranges also available
- Accuracy: up to 0.05 % (incl. calibration certificate)
- Intrinsically safe version
- Logger function with up to 50 measured values per second
CPG 500 Digital Pressure Gauge
- Measuring ranges from -1 … +16 bar to 0 … 1,000 bar (-14.5 ... 230 psi to 0 ... 14,500 psi)
- Accuracy: 0.25 % (incl. calibration certificate)
- Robust case with protective rubber cap
- Simple operation using four buttons
- Complete service cases incl. pressure generation available
IDM 01 - Digital pressure gauge
- nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar
- accuracy: 0.05 % FSO BFSL (class 0.05)
- modular sensor concept
- graphics-capable display
- background illumination
- communication interface USB 2.0
- stainless steel housing d = 100 mm
- zero point calibration
- data logger
LEO 5 - High-Resolution Manometer with Peak and Recording Function
- Pressure Ranges
- -1…3 bar rel.
- -1…10 bar rel.
- -1…30 bar rel.
- 0…4 bar abs.
- 0…11 bar abs.
- 0…31 bar abs.
- 0…100 bar
- 0…300 bar
- 0…1000 bar
- Accuracy
- 0,05 %FS
- (incl. linearity, repeateability and hysteresis)
- Total Error Band 0…50 °C
- 0,10 %FS
- (Accuracy incl. temperature error)
- Storage- / Operating Temperature -10…60 °C / 0…50 °C
- Protection IP66
IPM 63 - Digital Pressure Callibrator
- Range: 0...250 mbar bis 0...250 bar
- Analog output: 0(4)...20 mA, 0...10 V
- Contact output: DC PNP, max. 200 mA
- Accuracy: < 0.5% FS @ 25°C
- Response time: 200 ms
- Power supply:
- 10...30V DC, 20 mA output
- 16...30V DC, 10 V output
- Ambient temperature: -25...80 °C
- Process temperature: -25...100 °C
- Temperature coefficient: < 0.03% FS/K (zero), < 0.02% FS/K (span)
- Long term stability: < 0.5% FS p. a.
- Bayonet lock case: 1.4301 (304) IP 67
- Process connection: G 1/4 B, 1.4404
- Sensor: ceramic AL203
- Electrical connection: M8x1 4-pin connector IP 67
IPM 82 - Digital Pressure Callibrator
- Range: 0...500 mbar to 0...250 bar
- Analog output: 0(4)...20 mA, 0...10 V
- Contact output: DC PNP, max. 200 mA
- Accuracy: ≤ ± 0.5% FS @ 25°C
- Response time : 200 ms
- Power supply:
- 10...30V DC, 20 mA output
- 16…30V DC, 10 V output
- Ambient temperature: -25...80 °C
- Process temperature: -25...100 °C
- Temperature coefficient: ≤ ± 0.03% FS/K (zero), ≤ ± 0.02% FS/K (span)
- Long term stability: ≤ ± 0.5% FS p. a.
- Bayonet lock case: 1.4301 (304) IP 67
- Process connection: see table
- Sensor: ceramic AL203
- Electrical connection: M12x1, 5 pin connector
2000 P 2001 P 2002 P, 2003 P, 2005 P - Digital pressure gauges
- Pressure ranges from 1mbar to 10bar (0.40218 inH2O to 4021.8 inH2O)
- Pressure range to 500bar with an external transducer (not supplied)
- Logging and leak testing
- Autoranging displays for precise readings
- Selectable auto switch-off
- 2 year warranty
- Overrange protection
- IP67 (1m depth for 30 mins) BSI Cert 229/000132
- Negative and positive reading
IPM 82-3 - Digital contact gauge
- 3-digit 14 mm LED digital contact gauge
- 80 mm stainless steel case turnable 330°
- Min./max. memory
- Ranges from 25 mbar to 40 bar
- Dry ceramic sensor
- Analog output: 0(4)...20 mA, 0...10 V
- 2 DC PNP contact setpoints, max. 200 mA
- Available with all standard process connections
IPM 82-4 - Digital contact gauge
- 3-digit 14 mm LED contact gauge
- 80 mm stainless steel case
- Min./max. memory
- Ranges from -25 mbar to 60 bar
- Dry ceramic sensor
- Analog output: 0(4)...20 mA, 0...10 V
- 2 DC PNP contact setpoints, max. 200 mA
- Available with all standard process connections
IBAR 02 - Battery Powered Digital Pressure Gauge
- Nominal pressure:
- from 0 ... 100 mbar
- up to 0 ... 600 bar
- rotatable housing
- 2-line LC display
- 4.5-digit 7-segment display
- 6-digit 14-segment additional display
- min / max function with reset function
- offset and end point calibration
- setting the pressure unit (bar, mbar, psi, InHg, cmHg, mmHg,hPa, kPa, MPa, mH2O)
- switch-off automatic
IBAR 02P - Battery Powered Digital Pressure Gauge
- Nominal pressure:
- from 0 ... 100 mbar
- up to 0 ... 600 bar
- rotatable housing
- 2-line LC display
- 4.5-digit 7-segment display
- 6-digit 14-segment additional display
- min / max function with reset function
- offset and end point calibration
- setting the pressure unit (bar, mbar, psi, InHg, cmHg, mmHg,hPa, kPa, MPa, mH2O)
- switch-off automatic
IBAR 05 - Battery powered digital pressure gauge
- Nominal pressure
- from 0 ... 400 mbar
- up to 0 ... 600 bar
- rotatable housing
- 2-line LC display
- 4.5-digit 7-segment display
- 6-digit 14-segment additional display
- different mechanical connections: inch, NPT threads
- min / max function with reset function
- offset and end point calibration
- setting the pressure unit (bar, mbar, psi, InHg, cmHg, mmHg,hPa, kPa, MPa, mH2O)
- switch-off automatic configuration
IBAR 05P - Battery powered digital pressure gauge
- Nominal pressure:
- from 0 ... 400 mbar
- up to 0 ... 600 bar
- rotatable housing
- 2-line LC display
- 4.5-digit 7-segment display
- 6-digit 14-segment additional display
- different mechanical connections: inch, NPT threads
- min / max function with reset function
- offset and end point calibration
- setting the pressure unit (bar, mbar, psi, InHg, cmHg, mmHg, hPa, kPa, MPa, mH2O)
- switch-off automatic configuration
IDM 60 - Digital Gauge Type
- Measuring range: 0 to 60 bar,0 to 250 bar or 0 to 600 bar
- Accuracy: ± 0,5% F.S., ± 1 digit
- Wandlungsrate: 5/s
- 4-digit, 7-segment LCD display, 11 mm height, additional bargraph with 10 segments scale
- Proof pressure, 2.0x, 1000 bar max.
- Units: MPa, PSI and bar
- Pressure peak: min.- and max.-values
- Protection type: IP 65 acc. to EN 60529 / IEC 529
- Housing: stainless steel
- 2 x 1,5 V battery type AA, 4000 h
- Weight: approx. 0,4 kg
IPDM 80-2 - Differential pressure gauge
- Range: 0...25 mbar to 0...60 bar,12 bit resolution
- Display: 0...±1999, 14mm red LED
- Analog-output:
- 0(4)...20 mA, max. 500 Ω,
- switchable, 12 bit resolution,
- 0...10 V, max. 5 mA
- Relay-output: 2 relays, each 1 potential free change-over switch
- Switching load:
- 250V AC,max. 500 VA,
- 125V DC, max.100 W
- max. switching load 2 A
- Global error: < 0,2% F.S. ± 1 digit
- Supply voltage: 19...30V DC
- Ambient temperature: 0...60 °C
- Fluid temperature: -40...100 °C (125 °C < 0,5h)
- Thermal drift: < 0,015%/K F.S.
- Housing: ABS, 100x100x58, IP 65,
- Colour grey, RAL 7035
- Sensor: ceramic AL2 O3
